Measure Example for STMicroelectronics STR91x

Measure runs a remote measurement system that collects analog and digital data like a data acquisition system found in weather stations or process control applications.

The Measure example uses analog and digital inputs to simulate a datalogger. This implementation records data from two push buttons and four A/D inputs. A timer controls the sample rate. The sample interval can be configured from 1 millisecond to 60 minutes. Each measurement saves the current time and all of the input channels to a RAM buffer.

The usage of this example is described in Measure: A remote Measurement System.

Targets for Simulation and Board Keil MCBSTR9 are preset.

This example programm is precompiled for Simulation.
To run this example on Board Keil MCBSTR9 you must rebuild all targetfiles, connect the Evaluation Board via ULINK and download the application using Flash - Download.