RL-ARM HTTP Demo for MCB2400

NOTE: DO NOT RECOMPILE THE EXAMPLE WITHOUT RL-ARM LICENSE!

This is an HTTP Server example prebuild for the Keil MCB2400 Evaluation Board. It also shows how to use the Web Server CGI interface.

This example configures the LAN network parameters for the evaluation board automatically if a DHCP Server is available in your LAN.

To use this example:

• Connect ULINK to the Keil MCB2400 Evaluation Board and power the board up
• In uVision - load the project file and execute Flash - Download
• Connect the MCB2400 Board to a LAN with DHCP server (most LANs have this)
• Connect your computer to the same LAN
• Open your web browser and enter the address http://mcb2400/

This opens the demo page running on the MCB2400 Board. Enter:

User name: admin

Password: leave blank

The WEB pages shown are included into the project under HTTP Files group.

The HTTP_demo example is available for several targets:

• MCB2400: Stand-alone (no RTX Kernel) application
• MCB2400 Debug: Stand-alone (no RTX Kernel) with debug output
• MCB2400 RTX: Configured for RTX Kernel

This pre-compiled version may be downloaded using a evalution version of the RealView MDK-ARM package. Note that MDK-ARM Version 3.20Beta or later is required.