Keil Logo

Technical Data

Parameter Description
Supply Voltage 5 Volts DC (provided by the USB bus of a PC), or
8-12 Volts DC power from an external power supply.
Supply Current 320mA typical, 410mA maximum
XTAL Frequency 12 MHz
Microcontroller NXP LPC1857 (MCB1857) or
NXP LPC4357 (MCB4357)
Peripherals 1 × RS232 Interface,
1 × CAN Interface,
2 × USB Device, Host and OTG Interfaces (Full-speed and high-speed),
1 × Ethernet Interface,
1 × JTAG Interface,
1 × Cortex Debug Interface,
1 × Cortex Debug + ETM Interface,
2 x 8 Mbyte NOR Flash,
1 x 16 Mbyte SDRAM,
1 x 4 Mbyte Quad SPI Flash,
1 × MicroSD Memory Card connector,
1 × Color graphic display and touch screen (240x320),
1 × Temperature sensor,
6 × Push buttons (RESET, ISP, WAKEUP0, P4_0, P4_3, P4_4),
1 × Joystick (5-position),
1 × Analog Input (connected to potentiometer),
1 × Low power, Stereo CODEC (with headphone, speaker, and microphone support)
Board Size 124mm x 170mm (4.875" x 6.69").
  Arm logo
Important information

This site uses cookies to store information on your computer. By continuing to use our site, you consent to our cookies.

Change Settings

Privacy Policy Update

Arm’s Privacy Policy has been updated. By continuing to use our site, you consent to Arm’s Privacy Policy. Please review our Privacy Policy to learn more about our collection, use and transfers
of your data.